VXR-7000
Dual-durpose repeater for efficient communications
The VXR-7000 not only helps expand the communication range of two-way radio systems, but it also serves as a base station for convenient, easy fleet communications in public safety, industrial or administrative work areas.
Convert To Talk At a Press Of A Button
While a full-featured repeater, the VXR-7000 immediately switches to function in base station mode simply by pressing the Push to Talk Transmit button. Once released, the unit converts back to repeater mode.
Local Or Remote Operating Capability
Controlled by the operator with a press of a button, the VXR-7000 is designed to function as programmed. Or, switch to remote mode and the unit is controlled by instructions received from an external device connected to the accessory connector.
When Safety Counts
The VXR-7000 has DTMF decoding built-in to coordinate with the
Emergency and ANI functions found in Vertex Standard mobile and portable two-way radios. If an Emergency alert is received from a mobile or portable radio, the VXR-7000 will beep loudly and blink the LCD to notify the dispatcher of the emergency alert.
Uninterrupted Power Supply
For uninterrupted operation during power failures, a 12 volt rechargeable battery may be connected. During a power outage, the automatic power control circuit will immediately switch the repeater to the backup battery.
Additional Features
• 16 Channels
• 47 CTCSS tones / 108 DCS codes encode & decode
• 8-Character ANI / ENI ID Display
• CW ID Transmitter
• BCLO, BTLO
• DTMF Encode and decode
• Multi-tone decode / Community repeater (up to 16 tones)
• Time-Out Timer, Hang Timer, Guard Timer
• D-Sub 25 pin accessory connector
• Line interface port
General Specification
Frequency Range
VHF: 136 - 150 MHz (A), 150 – 174 MHz (C)
UHF: 400 – 430 MHz (A), 420 - 450 MHz (BS1), 450 – 480 MHz (D)
Number of Channels
16
Power Supply Voltage
200 / 240 V AC ±10% 50/60 Hz or 13.8 V DC
Channel Spacing
12.5 / 20 / 25 kHz
PLL Steps
VHF: 5.0 / 6.25 kHz
UHF: 2.5 / 5.0 / 6.25 kHz
Operating Temperature Range
-25ºC to +55ºC
Frequency Stability
±1.0 kHz
Antenna Impedance
50 Ohms (unbalanced)
Dimension (W X H X D)
325 x 115 x 391.5 mm
Weight (Approx.)
10 kg
Receiver Specification: measured by EN 300 086
Sensitivity 20 dB SINAD
-2 dB μV emf
Selectivity
70 dB / 60 dB
Intermodulation
70 dB
Spurious and Image Rejection
70 dB
Audio Output
4 W @ 4 Ohms 10% THD
Transmitter Specification: measured by EN 300 086
Output Power
5 to 25 W
Duty Cycle
50%
Modulation
16K0F3E, 11K0F3E
Modulation Limiting
±5.0 kHz / ±2.5 kHz
Audio Distortion
< 2.5% @ 1 kHz
Spurious Emission
-36 dBm @ ≤ 1 GHz, -30 dBm @ > 1 GHz
• MH-67A8J: Standard microphone
• MD-12A8J: Desktop microphone
• MR-3: 19” Rack mount kit (4U size)
• MR-4: 19” Rack mount kit (3U size)
Duplexer Options
• CT-68: Duplexer installation kit
• VXD-60VC: Internal duplexer VHF 148 - 160 MHz
• VXD-60UD: Internal duplexer UHF 440 - 480 MHz