VX-1210
Rugged, portable HF field communications
The 20-Watt VX-1210 HF manpack radio is designed for field communications when contact at all times is a must. Simple to operate, it is a self-contained HF station for both voice and non-voice operating modes. The VX-1210 HF radio is designed for real-world portable operations.
Light Weight, High-Capacity Lithium Ion Battery
The VX-1210 includes a 14.8 V Lithium-Ion battery with RX/TX battery saver option that lasts up to 24 hours in receive mode and up to 10 hours in standard SSB operation.
Memory for Large Group Communications
Get 500 channels and alphanumeric labels for each channel for quick and easy call management.
Easy Paging and Calling Options
Using the optional SEL-1200 unit, the VX-1210 supports paging, SELCALL and TELCALL options for fast and flexible communications. Options can be pre-programmed or manually entered for temporary calling requirements.
Integral Noise Blanker
The VX-1210 has a built-in noise blanker capability to improve operation in high noise and areas with significant interference. The noise blanker enhances intelligibility in the presence of vehicular ignition noise and other sources of RF generated impulse noise.
Automatic Antenna Tuning
With the optional ATU-1210 unit installed, simply press and hold the assigned toggle switch to initiate automatic antenna tuning for whip antennas.
Additional Features
• Three programmable keys
• SSB/CW, AM and Data operating modes
• Battery status monitor
• Call alert / Hailer (multiple tones)
• CW Semi break-in
• TOT
• Kill system for unauthorised use (via SELCALL)
• Whip antenna (YHA-61)
General Specification
Frequency Range
RX: 0.5 – 30 MHz; TX: 1.6 – 30 MHz
Number of Channels
500
Emission Type
A1A(CW); J3E(LSB/USB); H3E(AM); F1B(AFSK)
Power Requirements
DC 14.8 V Lithium-ion Battery
Recharge Time
5 hours (typical)
Channel Spacing
10 Hz
Current Consumption
RX: 500 mA (saver off), 100 mA (saver on)
TX: 5 A (20 W), 3 A (5 W)
Operating Temperature Range
-30ºC to +60ºC
Antenna Impedance
50 Ohms (unbalanced)
Dimension (W x H x D)
193 x 74 x 274 mm w/o knobs
Weight (Approx.)
3.2 kg w/FNB-66LI
Receiver Specification
Circuit Type
Double Conversion Super Heterodyne
Intermediate Frequency
47.055 MHz & 10.7 MHz
Sensitivity
0.25 μV (J3E / A1A, 10 dB S/N)
Selectivity
2.4 kHz / 5.0 kHz (-6/-60 dB)
Clarifier Adjustment Range
±200 Hz (J3E/A1A/F1B), ±400 Hz (H3E)
IF and Image Rejection
80 dB
Audio Output
At least 1.5 W @ 4 Ohms @ 10% THD
Audio Impedance
4 - 32 Ohms
Transmitter Specification
Output Power
20W / 5W (J3E/A1A/F1B), 10W / 2.5W (H3E)
Duty Cycle
25% voice
Modulation
Balanced Modulator (SSB: J3E)
Early Stage / Low Level (AM:H3E)
Carrier Suppression
55 dB
Undesired Sideband Suppression
55 dB @ 1.5 kHz tone
Spurious Emission
-56 dB or better
Audio Response (J3E)
350 - 2650 Hz (-6 dB)
3rd-order IMD
-31 dB
Microphone Impedance
2K Ohms, condenser type
• MH-50B7A: Speaker microphone
• FNB-66LI: 14.8V Lithium-ion battery pack (req. PA-26)
• CD-17: Rapid charger
• PA-26: AC Adapter
• ATU-1210: Internal antenna coupler
• SEL-1200: SELCALL unit
• YA-30: Dipole antenna (T2FD type)
• FHA-27: Folding whip antenna (requires GN-1210)
• GN-1210: Goose neck connector
• SVC-1200: Service Kit
• DSV-1200: D-sub 9-pin connector unit